HP ProLiant DL360 G10 Plus
The HPE ProLiant DL360 Gen10 Plus 10-Bay 2.5" Universal server is a 1U, 10th Generation Plus (Gen10+), dual-socket, Intel-based rack server designed for dense, performance-focused data center environments. When fully configured, the system can weigh in the mid-40 lb range depending on components and drive population. The system board supports 2x Intel LGA4189 sockets accommodating Intel’s 3rd Generation Xeon Scalable processors, with a maximum TDP of up to 270W per CPU, maximum processor speeds approaching 3.7 GHz, and up to 80 total cores in a dual-CPU configuration. The platform supports 16 DIMM slots per processor for a total of 32 DIMMs, with a maximum memory capacity of up to 8TB of DDR4 ECC Registered memory running at speeds up to 3200 MHz.
Select a HP ProLiant DL360 G10 Plus
HP ProLiant DL360 G10 Premium 8x Universal + 2x NVMe SFF Rack-Mountable 1U Server Chassis
Manufacturer: HP
Documentation not available
- Processor
- 2x 3rd Gen Intel Xeon Scalable (Ice Lake), LGA4189, up to 270W
- Max Cores
- 80 (40 per CPU)
View all Processor specs- Memory
- 32 DIMMs, up to 8 TB DDR4-3200 ECC RDIMM
- Max Storage
- Up to 1.5 PB (12x NVMe with rear flex-bay)
- Drive Bays
- 10x SFF (Universal, NVMe, SAS, SATA) or 4x LFF · optional 2x rear SFF
- Networking
- Embedded Quad-Port 1GB RJ-45 w/ optional NDC
- Expansion
- Up to 3x PCIe 4.0 slots
- Power Supply
- 2x hot-plug redundant, up to 1,600 W
- Form Factor
- 1U rack · Mid-40 lb range fully configured
Model overview
The HPE ProLiant DL360 Gen10 Plus chassis takes 2x hot-plug / hot-swap redundant power supplies with total wattage of up to 1,600 Watts. Max storage capacity can reach roughly 1.5PB’s when running NVMe drives across the front bays and the optional rear flex-bay. The chassis is available in 10x 2.5” / SFF configurations supporting Universal, NVMe, SAS and SATA drives, as well as a 4x 3.5” / LFF SAS / SATA option. The optional rear flex-bay adds either 2x SFF SAS / SATA / NVMe drives or 2x SFF NVMe drives, bringing the SFF chassis to a total of 12x drives – not bad for a 1U box.
Rather than an embedded network connection, the HPE ProLiant DL360 Gen10 Plus relies on an optional LOM / NDC slot, so you pick exactly the connectivity your rack needs. Depending on the riser configuration, the server could take up to 3x PCIe 4.0 (Gen 4) NIC slots – a real step up from the PCIe 3.0 slots on its DL360 G10 predecessor.
GPU support
- Up to 2x single-width GPUs
Key features
- Universal drive bays supporting NVMe, SAS or SATA drives
- Optional rear flex-bay with 2x SFF SATA / SAS / NVMe drives
- Riser card support for up to 2x M.2 NVMe SSDs
- HPE iLO 5 remote management
Recommended uses
- Website Hosting
- Media
- File Hosting
- Database
- Data Mining
Configured servers
Build your own configurationLoading server comparison data...
Explore related models
- Previous generation
- HP ProLiant DL360 G10
- Equivalent models
- Dell PowerEdge R650
Documentation
No documents are available for this chassis. Contact us for technical assistance.
Still have questions?
We’re here to help. Tell us what you’re building and we’ll help you configure a HP ProLiant DL360 G10 Plus that fits your rack and your budget.
Send us a message
A real engineer reads every one of these messages and will get back to you within 24 hours.