The HP ProLiant DL365 G10+ server is a 1U, gen 10 Plus V2 (G10+), AMD-based rack server, which can weigh up to 40Lbs when fully configured. The server's motherboard supports 2x AMD SP3 sockets that accommodate AMD's EPYC V2 / V3 Series processors with a maximium TDP of 280W, maximum speed per processor of 3.70Ghz, and a maximum of 128 Cores. The HP ProLiant DL365 G10 Plus V2 server supports 16x DIMMs per CPU for a total of 32x RAM slots and a maximum of 8.2TB of PC4 / DDR4 ECC Registered memory with a max speed of 3200 Mhz.

The HP ProLiant DL365 Gen 10 Plus V2 chassis takes 2x hot-plug / hot-swap redundant power supplies / PSUs with total wattage of up to 1,600 Watts. This supports up to of SATA / SAS / NVMe storage natively. The can support a maximum of 10x SFF / 2.5 inch SATA / SAS drives or a maximum of 2x SFF / 2.5 inch NVMe drives. It does not support any LFF / 3.5 inch drives.

The comes with a modular LOM / NDC slot that accommodates a wide range of network daughter card connections. It also supports 1x OCP 3.0 Card. Depending on the riser configuration, the could take up to 3x PCIe 4.0 (Gen 4) NIC slots. Depending on the riser configuration, the HP ProLiant DL365 G10 Plus V2 server could accommodate up to 2x single-width GPUs.

Key additional features include: support of riser card with up to 2x M.2 NVMe SSDs and HP iLO 5 remote access / managament capabilities.