Dell PowerEdge R930

The Dell PowerEdge R930 server is a 4U, 13th gen (13G), Intel-based rack server, which can weigh up to 130Lbs when fully configured. The server's motherboard supports 4x Intel LGA2011 / Socket-R sockets that accommodate Intel's Xeon E7-4800 V3 / V4 and Xeon E7-8800 V3 / V4 Series processors with a maximium TDP of 165W, maximum speed per processor of 3.20Ghz, and a maximum of 96 Cores. The Dell PowerEdge R930 server supports 24x DIMMs per CPU for a total of 96x RAM slots and a maximum of 12.3TB of PC4 / DDR4 ECC Registered memory with a max speed of 2666 Mhz.

The Dell PowerEdge R930 chassis takes 4x hot-plug / hot-swap redundant power supplies / PSUs with total wattage of up to 2,200 Watts. Max storage capacity exceeds 1105.9TB. Depending on the chassis configuration, the Dell PowerEdge R930 server can support a maximum of 24x SFF / 2.5 inch SATA / SAS drives or a maximum of 8x SFF / 2.5 inch NVMe drives. It does not support any LFF / 3.5 inch drives.

The Dell PowerEdge R930 server comes with a modular LOM / NDC slot that accommodates a wide range of network daughter card connections. Depending on the riser configuration, the Dell PowerEdge R930 server could take up to 10x PCIe 3.0 (Gen 3) NIC slots. Depending on the riser configuration, the Dell PowerEdge R930 server could accommodate up to 4x double-wide GPUs or up to 8x single-wide GPUs.

Key additional features include: Quick Sync setup features, flex-zoning, and DRAC 8 Dell remote access capabilities.