The selected chassis is a 1U 16th gen (16G) Dell PowerEdge R660xs 10-bay SFF / 2.5" NVMe rack server. The Dell PowerEdge R660xs 10-bay NVMe SFF server supports 2x Intel SP5 sockets that accommodate Intel's Xeon Scalable V4 Series processors with a maximium TDP of 250W, maximum speed per processor of 3.90Ghz, and a maximum of 64 Cores. The Dell PowerEdge R660xs chassis supports 8x DIMMs per CPU for a total of 16x RAM slots and a maximum of 2.0TB of memory. The Dell PowerEdge R660xs chassis takes 2x hot-plug / hot-swap redundant power supplies / PSUs with total wattage of up to 1,800 Watts. This Dell PowerEdge R660xs server supports up to 307.2TB of NVMe storage natively, without optional flex-bays. With the additional flex-bay slots, the system can support up to 368.6TB of storage. The Dell PowerEdge R660xs 10-bay NVMe SFF server can support a maximum of 2x SFF / 2.5 inch SATA / SAS drives or a maximum of 12x SFF / 2.5 inch NVMe drives. It does not support any LFF / 3.5 inch drives. The Dell PowerEdge R660xs server comes with an embedded dual-port 1GB RJ-45 network connection with an optional LOM / NDC slot that accommodates an OCP 3.0 LOM card. Depending on the riser configuration, the Dell PowerEdge R660xs 10-bay NVMe SFF server could take up to 5x PCIe NIC slots. Up to 3x PCIe 4.0 (Gen 4) slots and up to 2x PCIe 5.0 (Gen 5) slots. Depending on the riser configuration, the Dell PowerEdge R660xs chassis could accommodate up to 2x single-width GPUs. When fully configured with all drives and accessories, the Dell PowerEdge R660xs 10-bay NVMe SFF server can weigh up to 41.3Lbs. Key additional features include: support of Boss-N1 card with up to 2x M.2 NVMe SSDs and DRAC 9 Dell remote access capabilities.