Dell PowerEdge R440

The Dell PowerEdge R440 server is a 1U, 14th gen (14G), Intel-based rack server, which can weigh up to 39Lbs when fully configured. The server's motherboard supports 2x Intel LGA3647 / Socket-P sockets that accommodate Intel's Xeon Scalable V1 / V2 Series processors with a maximium TDP of 195W, maximum speed per processor of 3.80Ghz, and a maximum of 44 Cores. The Dell PowerEdge R440 server supports 8x DIMMs per CPU for a total of 16x RAM slots and a maximum of 4.1TB of PC4 / DDR4 ECC Registered memory with a max speed of 3200 Mhz.

The Dell PowerEdge R440 chassis takes 2x hot-plug / hot-swap redundant power supplies / PSUs with total wattage of up to 550 Watts. Max storage capacity exceeds 583.7TB. Depending on the chassis configuration, the Dell PowerEdge R440 server can support a maximum of 10x SFF / 2.5 inch SATA / SAS drives, a maximum of 4x SFF / 2.5 inch NVMe drives or a maximum of 4x LFF / 3.5 inch drives.

The Dell PowerEdge R440 server comes with an embedded dual-port 1GB RJ-45 network connection with an optional LOM / NDC slot that accommodates an OCP 2.0 LOM card. Depending on the riser configuration, the Dell PowerEdge R440 server could take up to 3x PCIe 3.0 (Gen 3) NIC slots. Depending on the riser configuration, the Dell PowerEdge R440 server could accommodate a single-wide GPU.

Key additional features include: support of Boss-S1 card with up to 2x M.2 SATA SSDs, Quick Sync 2 setup features, and DRAC 9 Dell remote access capabilities.