HP ProLiant DL560 G10

The HP ProLiant DL560 G10 server is a 2U, gen 10 (G10), Intel-based rack server, which can weigh up to 75Lbs when fully configured. The server's motherboard supports 4x Intel LGA3647 / Socket-P sockets that accommodate Intel's Xeon Scalable V1 / V2 Series processors with a maximium TDP of 205W, maximum speed per processor of 3.90Ghz, and a maximum of 112 Cores. The HP ProLiant DL560 G10 server supports 12x DIMMs per CPU for a total of 48x RAM slots and a maximum of 12.3TB of PC4 / DDR4 ECC Registered memory with a max speed of 3200 Mhz.

The Dell PowerEdge R230 chassis takes 1x cabled power supply / PSU with total wattage of up to 250 Watts. Max storage capacity exceeds 2089.0TB. Depending on the chassis configuration, the HP ProLiant DL560 G10 server can support a maximum of 24x SFF / 2.5 inch SATA / SAS drives or a maximum of 16x SFF / 2.5 inch NVMe drives. It does not support any LFF / 3.5 inch drives.

The HP ProLiant DL560 G10 server comes with an embedded quad-port 1GB RJ-45 network connection with an optional LOM / NDC slot that accommodates a wide range of network daughter card connections. Depending on the riser configuration, the HP ProLiant DL560 G10 server could take up to 8x PCIe 3.0 (Gen 3) NIC slots. Depending on the riser configuration, the HP ProLiant DL560 G10 server could accommodate up to 2x double-wide GPUs or up to 4x single-wide GPUs.

Key additional features include: support of riser card with up to 2x M.2 SATA SSDs and HP iLO G10 remote access / managament capabilities.