HP ProLiant DL360 G10

The HP ProLiant DL360 G10 server is a 1U, gen 10 (G10), Intel-based rack server, which can weigh up to 37Lbs when fully configured. The server's motherboard supports 2x Intel LGA3647 / Socket-P sockets that accommodate Intel's Xeon Scalable V1 / V2 Series processors with a maximium TDP of 205W, maximum speed per processor of 3.90Ghz, and a maximum of 56 Cores. The HP ProLiant DL360 G10 server supports 12x DIMMs per CPU for a total of 24x RAM slots and a maximum of 6.1TB of PC4 / DDR4 ECC Registered memory with a max speed of 3200 Mhz.

The HP ProLiant DL385 Gen 10 chassis takes 2x hot-plug / hot-swap redundant power supplies / PSUs with total wattage of up to 1,600 Watts. Total storage maxes out at 368.6TB without the optional flex-bay drives. Including optional flex-bay drives, max storage exceeds 384.0TB. Depending on the chassis configuration, the HP ProLiant DL360 G10 server can support a maximum of 11x SFF / 2.5 inch SATA / SAS drives, a maximum of 2x SFF / 2.5 inch NVMe drives or a maximum of 4x LFF / 3.5 inch drives.

The HP ProLiant DL360 G10 server comes with an embedded quad-port 1GB RJ-45 network connection with an optional LOM / NDC slot that accommodates a wide range of network daughter card connections. Depending on the riser configuration, the HP ProLiant DL360 G10 server could take up to 3x PCIe 3.0 (Gen 3) NIC slots. Depending on the riser configuration, the HP ProLiant DL360 G10 server could accommodate up to 2x single-wide GPUs.

Key additional features include: support of riser card with up to 2x M.2 SATA SSDs and HP iLO G10 remote access / managament capabilities.