HP ProLiant DL385 G10 Plus V2

The HP ProLiant DL385 G10+ V2 server is a 2U, gen 10 Plus V2 (G10+), AMD-based rack server, which can weigh up to 55Lbs when fully configured. The server's motherboard supports 2x AMD SP3 sockets that accommodate AMD's EPYC V2 / V3 Series processors with a maximium TDP of 280W, maximum speed per processor of 3.70Ghz, and a maximum of 128 Cores. The HP ProLiant DL385 G10 Plus V2 server supports 16x DIMMs per CPU for a total of 32x RAM slots and a maximum of 8.2TB of PC4 / DDR4 ECC Registered memory with a max speed of 3200 Mhz.

The HP ProLiant DL385 Gen 10 Plus V2 chassis takes 2x hot-plug / hot-swap redundant power supplies / PSUs with total wattage of up to 1,600 Watts. Total storage maxes out at 2949.1TB without the optional flex-bay drives. Including optional flex-bay drives, max storage exceeds 4028.2TB. The can support a maximum of 38x SFF / 2.5 inch SATA / SAS drives, a maximum of 32x SFF / 2.5 inch NVMe drives or a maximum of 20x LFF / 3.5 inch drives.

The comes with a modular LOM / NDC slot that accommodates a wide range of network daughter card connections. It also supports 1x OCP 3.0 Card. Depending on the riser configuration, the could take up to 8x PCIe 4.0 (Gen 4) NIC slots. Depending on the riser configuration, the HP ProLiant DL385 G10 Plus V2 server could accommodate up to 2x double-wide GPUs or up to 4x single-wide GPUs.

Key additional features include: support of riser card with up to 2x M.2 NVMe SSDs and HP iLO 5 remote access / managament capabilities.